Shell Thickness Research Articles

Near Infrared Light-Emitting Diodes Based on Colloidal InAs/ZnSe Core/Thick-Shell Quantum Dots.

Heavy-metal-free III-V colloidal quantum dots (QDs) exhibit promising attributes for application in optoelectronics. Among them, InAs QDs are demonstrating excellent optical performance with respect to absorption and emission in the near-infrared spectral domain. Recently, InAs QDs attained a substantial improvement in photoluminescence quantum yield, achieving 70% at a wavelength of 900 nm through the strategic overgrowth of a thick ZnSe shell atop the InAs core. In the present study, light-emitting diodes (LEDs) based on this type of InAs/ZnSe QDs are fabricated, reaching an external quantum efficiency (EQE) of 13.3%, a turn-on voltage of 1.5V, and a maximum radiance of 12 Wsr-1m-2. Importantly, the LEDs exhibit an extensive emission dynamic range, characterized by a nearly linear correlation between emission intensity and current density, which can be attributed to the efficient passivation provided by the thick ZnSe shell. The obtained results are comparable to state-of-the-art PbS QD LEDs. Furthermore, it should be stressed not only that the fabricated LEDs are fully RoHS-compliant but also that the emitting InAs QDs are prepared via a synthetic route based on a non-pyrophoric, cheap, and commercially available as precursor, namely tris(dimethylamino)-arsine.

Free vibration analysis of functionally graded sandwich spherical shells with honeycomb core resting on Kerr foundation using the MITC4 element

ABSTRACT The main object of this paper is to further extend the MITC4 element to analyse the free vibration of FG sandwich spherical shells with a honeycomb core (so-called h-FGSS shells) resting on Kerr foundation (KF). The MITC4 originates from a three-dimensional continuum description degenerated to shell behaviour which can be applied to both thick and thin shells. The h-FGSS shell consists of an inner honeycomb core and two different FG skin layers. FSDT is used due to its simplicity and efficiency. The KF includes three parameters as upper springer stiffness ( k U ), upper springer stiffness ( k L ), and the shear layer stiffness ( k S ). The performance and accuracy of the present formulation are verified through comparative examples. Furthermore, the numerical and graphical results show a general picture of the influence of the input parameters on the free vibration of h-FGSS shells, especially the geometrical parameters of the honeycomb core.

Frequency of Thick FGM Spherical Shells with TSDT Under Thermal Environment

Frequency of Thick FGM Spherical Shells with TSDT Under Thermal Environment

Hybrid upconverting/paramagnetic Fe3O4/Gd2O3:Er3+, Yb3+, Mg2+, Nd3+ nanoparticles – synthesis, characterisation and biological applications

The goals of this work are to design and develop a technology for fabrication and study of multifunctional properties of core/shell nanoparticles (NPs) as magnetic/luminescent markers. The new hybrid core/shell Fe3O4/Gd2O3:1% Er3+, 18% Yb3+, 2.5% Mg2+, x% Nd3+ NPs doped with different concentrations of neodymium ions, where x = 0%, 0.5%, 0.75%, 1%, 2%, 4%, were synthesized by the co-precipitation method. The NPs were characterised using XRD, TEM, SEM, EDX, confocal microscopy and photoluminescence. Fe3O4 (core) consists of several 13 nm NPs. The core/shell NPs have sizes from 220 nm to 641 nm. In this latter case, the shell thicknesses were 72, 80, and 121 nm. The upconversion efficiency properties and magnetic properties of the hybrid NPs were investigated. In the core/shell NPs, the addition of Nd3+ quenches the luminescence. The magnetic response of core/shell samples is rather paramagnetic and does not differ significantly from that registered for the shell material alone. For Gd2O3:1% Er3+, 18% Yb3+ and Fe3O4/Gd2O3:1% Er3+, 18% Yb3+, 2.5% Mg2+, 0.5% Nd3+, at 300 K, the values of the magnetization registered at ~ 40 kOe are similar and equal to ~ 5.3 emu·g−1. The survivability of the HeLa tumor cells with the presence of the core/shell NPs was investigated for 24 h. The NPs are non-toxic up to a concentration of 1000 µg·ml−1 and penetrate cells in the process of endocytosis which has been confirmed by confocal microscope studies.

Transcriptome profiling of aerial and subterranean peanut pod development

Peanut (Arachis hypogaea) showcases geocarpic behavior, transitioning from aerial flowering to subterranean seed development. We recently obtained an atavistic variant of this species, capable of producing aerial and subterranean pods on a single plant. Notably, although these pod types share similar vigor levels, they exhibit distinct differences in their physical aspects, such as pod size, color, and shell thickness. We constructed 63 RNA-sequencing datasets, comprising three biological replicates for each of 21 distinct tissues spanning six developmental stages for both pod types, providing a rich tapestry of the pod development process. This comprehensive analysis yielded an impressive 409.36 Gb of clean bases, facilitating the detection of 42,401 expressed genes. By comparing the transcriptomic data of the aerial and subterranean pods, we identified many differentially expressed genes (DEGs), highlighting their distinct developmental pathways. By providing a detailed workflow from the initial sampling to the final DEGs, this study serves as an important resource, paving the way for future research into peanut pod development and aiding transcriptome-based expression profiling and candidate gene identification.

Enhancing Mechanical Characteristics of PETG Carbon Fiber Composite through Various Shell Thickness in FDM Processing

The utilization of PETG (Polyethylene Terephthalate Glycol) carbon fiber composites in Fused Deposition Modelling (FDM) processes has gained significant attention due to their enhanced mechanical properties compared to traditional PETG filaments. This study focuses on investigating the impact of varying shell thickness on the mechanical characteristics of PETG carbon fiber composites fabricated through FDM. The objective is to optimize the shell thickness to achieve superior mechanical performance while maintaining printing efficiency. A series of PETG carbon fiber composites with different shell thicknesses were manufactured using an FDM 3D printer. Mechanical tests, including tensile strength, flexural strength, and impact resistance, were conducted to evaluate the performance of the fabricated specimens. Additionally, micro-structural analysis was performed to understand the influence of shell thickness on the interfacial bonding between PETG matrix and carbon fibers. Preliminary results indicate that increasing shell thickness positively affects the mechanical properties of PETG carbon fiber composites. Tensile and flexural strength show a noticeable improvement with an increase in shell thickness, attributed to enhanced interlayer adhesion and improved load-bearing.

Island-in-Sea Structured Pt3Fe Nanoparticles-in-Fe Single Atoms Loaded in Carbon Materials as Superior Electrocatalysts toward Alkaline HER and Acidic ORR.

In this work, Pt3Fe nanoparticles (Pt3Fe NPs) with the ordered internal structure and Pt-rich shells surrounded by plenty of Fe single atoms (Fe SAs) as active species (Pt3Fe NP-in-Fe SA) loaded in the carbon materials are successfully fabricated, which are abbreviated as island-in-sea structured (IISS) Pt3Fe NP-in-Fe SA catalysts. Moreover, the synergistic effect of O-bridging between Pt3Fe NPs and Fe SAs, and the ordered internal structured Pt3Fe NPs with Pt-rich shells of an optimal thickness contributes to the achievement of the local acidic environments on the surfaces of Pt3Fe NPs in the alkaline hydrogen evolution reaction (HER) and the enhancement of the desorption rate of *OH intermediate in the acidic oxygen reduction reaction (ORR). In addition, the electronic interactions between Pt3Fe NPs and dispersed Fe SAs cannot only provide efficient electrons transfer, but also prevent the aggregation and dissolution of Pt3Fe NPs. Furthermore, the overpotential and the half wave potential of the as-prepared IISS Pt3Fe NP-in-Fe SA catalysts toward the alkaline HER and toward the acidic ORR are 8mV at a current density of 10mAcm-2 and 0.933V, respectively, which is 29 lower and 86mV higher than those (37mV and 0.847V) of commercial Pt/C catalysts.

Gas-Phase Functionalization of Phytoglycogen Nanoparticles and the Role of Reagent Structure in the Formation of Self-Limiting Hydrophobic Shells.

A suite of acyl chloride structural isomers (C6H11OCl) was used to effect gas-phase esterification of starch-based phytoglycogen nanoparticles (PhG NPs). The surface degree of substitution (DS) was quantified using X-ray photoelectron spectroscopy, while the overall DS was quantified using 1H NMR spectroscopy. Gas-phase modification initiates at the NP surface, with the extent of surface and overall esterification determined by both the reaction time and the steric footprint of the acyl chloride reagent. The less sterically hindered acyl chlorides diffuse fully into the NP interior, while the branched isomers are restricted to the near-surface region and form self-limiting hydrophobic shells, with shell thicknesses decreasing with increasing steric footprint. These differences in substitution were also reflected in the solubility of the NPs, with water solubility systematically decreasing with increasing DS. The ability to separately control both the surface and overall degree of functionalization and thereby form thin hydrophobic shells has significant implications for the development of polysaccharide-based biopolymers as nanocarrier delivery systems.

Morphological and pomological assessments of seedling-originated walnut (Juglans regia L.) trees to select the promising late-leafing genotypes.

In many parts of the world, including Iran, walnut (Juglans regia L.) production is limited by late-spring frosts. Therefore, the use of late-leafing walnuts in areas with late-spring frost is the most important method to improve yield. In the present study, the phenotypic diversity of 141 seedling genotypes of walnut available in the Senejan area, Arak region, Markazi province, Iran was studied based on morphological traits to obtain superior late-leafing genotypes in the cropping seasons of 2022 and 2023. Based on the results of the analysis of variance, the studied genotypes showed a significant variation in terms of most of the studied morphological and pomological traits. Therefore, it is possible to choose genotypes for different values ​​of a trait. Kernel weight showed positive and significant correlations with leaf length (r = 0.32), leaf width (r = 0.33), petiole length (r = 0.26), terminal leaflet length (r = 0.34), terminal leaflet width (r = 0.21), nut length (r = 0.48), nut width (r = 0.73), nut weight (r = 0.83), kernel length (r = 0.64), and kernel width (r = 0.89). The 46 out of 141 studied genotypes were late-leafing and were analyzed separately. Among late-leafing genotypes, the length of the nut was in the range of 29.33-48.50mm, the width of the nut was in the range of 27.51-39.89mm, and nut weight was in the range of 8.18-16.06g. The thickness of shell was in the range of 1.11-2.60mm. Also, kernel length ranged from 21.97-34.84mm, kernel width ranged from 21.10-31.09mm, and kernel weight ranged from 3.10-7.97g. Based on important and commercial traits in walnut breeding programs, such as nut weight, kernel weight, kernel percentage, kernel color, and ease of kernel removal from nuts, 15 genotypes, including no.92, 91, 31, 38, 33, 18, 93, 3, 58, 108, 16, 70, 15, 82, and 32 were superior and could be used in walnut breeding programs in line with the introduction of new cultivars and the revival of traditional walnut orchards to commercialize them.

Supplemental phosphorus can be completely replaced with microbial phytase in White Leghorn layer diets

ABSTRACT 1. A study was conducted to assess the possibility of totally replacing supplemental phosphorus sources in White Leghorn (WL) layer diets (aged 28 to 45 weeks of age) with microbial phytase supplementation. One thousand commercial layers (HyLine White) of 28 weeks of age were housed in California cages fitted in open-sided poultry shed at the rate of 20 layers in each replicate. Ten replicates were randomly allotted to each treatment, and the respective diet was fed from 28 to 45 weeks of age. 2. A control diet (CD) containing the recommended levels of non-phytate phosphorus (3.6 g/kg NPP) and four other test diets (2–5) having sub-optimal levels of NPP (2.4, 2.0, 1.6 and 1.2 g/kg), but with supplemental microbial phytase (600 FTU/kg) were prepared and fed for the trial duration. 3. The layers fed with lower levels of NPP with phytase had the same laying performance as the group fed the CD. Egg production, feed efficiency, egg mass, shell defects, egg density, shell weight, shell thickness, ash content and breaking strength of the tibia and sternum were not affected by feeding the lowest concentration of NPP (1.2 g/kg) plus microbial phytase. 4. Phytase supplementation in diets with sub-optimal levels of NPP (2.4, 2 and 1.6 g/kg) significantly improved the Haugh unit score compared to those fed the CD. 5. It was concluded that supplemental phosphorus can be completely replaced with microbial phytase (600 FTU/kg) in a diet without affecting egg production, shell quality or bone mineral variables in WL layers (28 to 45 weeks).

A New Design Method for Obround Shells

Abstract The design of obround components has been difficult and complex due to the absence of a suitable theoretical solution. Current design codes use empirical formulas based on assumptions to determine the minimum required thickness for obround components. The design process involves iteration. The results obtained are far from accurate. Based on a recently proposed closed-form solution, a new design method for obround components is developed. In the new method, an obround shell is imagined as being stretched laterally from a cylindrical shell or parent cylinder. With the flattened shell increasing, the thickness of the obround shell should increase accordingly, to keep the maximum hoop stress of obround shell consistent with the maximum hoop stress of the parent cylinder. The minimum requested thickness (MRT), of the obround shell is related to the MRT of the parent cylinder and the flattened shell length of the obround shell. Through parametric studies, those relationships are investigated. Empirical expressions are used to describe those relationships. Using the proposed design method, the determination of the MRT of obround members becomes the determination of the MRT of the parent cylinders and additional parameters. The MRT of obround members is determined directly. The case study demonstrates that the proposed method is an efficient and accurate design process for obround members. The use of new method for fitness-for-service was explored. The new method can be used to reassess operational safety in the event of vessel materials' deterioration.

Electronic and optical properties of tetrapod quantum dots under applied electric and magnetic fields

In this work, the ground and low-lying excited states in GaAs tetrapod-shaped nanocrystals and in CdTe/CdS core/shell tetrapod-shaped nanocrystals are computed in the case of a finite confinement potential model using the finite element method and the effective mass approximation. For the single material tetrapod, electron energy levels are studied as a function of size parameters and the intensity of externally applied electric and magnetic fields, while for the core/shell tetrapod the electron and hole states are analyzed relative to size parameters of the core and shell thickness. The results show that the energies are strongly influenced by the tip-arm geometry, arm diameter, shell thickness and the intensity of the electric and magnetic fields.

Thermosensitive ZnO-PMMA/PEG microgels: A smart sunscreen with adapting SPF to ambient temperature fluctuations

Increasing awareness of the importance of ultraviolet protection has led to the development and utilization of sunscreen products. The sun protection factor (SPF) value of traditional sunscreens is fixed and cannot be flexibly adapted to changing environmental requirements. Herein, we fabricate a series of thermosensitive ZnO-poly (methyl methacrylate)/nonlinear poly(ethylene glycol) (PMMA/PEG) core-shell microgel with different monomer ratios. The PMMA core particle is designed to immobilize ZnO nanoparticles for achieving high loading capacity, and the hydrophilic nonlinear PEG gel shell possesses good biocompatibility and provides adjustable SPF value in response to different environmental conditions. The prepared microgels are monodisperse spherical with a well-defined core-shell morphology. The shell thickness of the microgels can be easily controlled by changing the feeding ratios of shell precursors. The optimized ZnO-PMMA/PEG microgels display significant sun protection properties at a concentration of 10 wt% (SPF 45 ± 5.9, 20 °C) and enhanced UV resistance performance as the temperature increases (SPF 53.1 ± 1.1, 37 °C). Both cell and mouse experiments confirmed the limited skin penetration potential of the microgels and their good compatibility with biological systems. This developed ZnO-PMMA/PEG microgels exhibit promising application potential in intelligent sunscreen technology.

Synthesis and characterization of Fe3O4 core nanoparticles coated with TiO2 and ZnO

The room temperature synthesis of the core-shell-shell (CSS) nanoparticles was demonstrated to be green, low-cost, and reproducible. The magnetic core of Fe3O4 nanoparticles was coated with TiO2 and ZnO in two steps. The obtained CSS nanoparticles were extensively characterized by XPS, TEM, XRD, DRS-UV–vis, N2 Physisorption, Electromagnetic, and Raman spectroscopy. XPS analysis revealed that the magnetic core was successfully functionalized with the citric acid. The ratio between the ferric cations (Fe3+) and ferrous (Fe2+) is typically reported to be around two due to the presence of FeO and Fe2O3 to balance the charge in the structure. Nevertheless, XPS results demonstrated that the ratio resulted in higher stability than that of the crystal nominal structure, suggesting that the surface of the CSS is slightly enriched with Fe3+ cations. TEM results indicated an average core diameter of approximately 9±1 nm for Fe3O4 (M-US); the first shell exhibited an average thickness of 3±1 nm, while the ZnO second shell thickness resulted in around 2±1 nm. X-ray diffraction analysis identified inverse spinel, hematite, anatase, and zincite phases in M-US, MT, and MTZ, respectively. Notably, the MTZ sample also contained hematite in addition to inverse spinel. Diffuse Reflectance UV-Vis Spectroscopy results demonstrated a reduction in the band gap as the shell coverage varied. N2 adsorption-desorption isotherms indicated an increase in the surface area as the core nanoparticles were coated with the subsequent shells. Additionally, the coated samples presented a mesoporous structure with a maximum surface area of 110 m2g−1 for the MT material. Raman spectroscopy confirmed the presence of vibrational modes related to TiO2 and ZnO. The core-shell-shell nanoparticles presented suitable electronic properties to potentially be applied in the photodegradation of harmful compounds and azo dyes.

Collapse of concrete target subjected to embedded explosion of shelled explosive

This paper broadens previous research concerning spalling damage in concrete structures under buried explosions, by additionally examining the effects of shell thickness and shell head length of the warhead experimentally and numerically. In the experiment, concrete targets were subjected to the embedded explosion of cylindrical shelled explosives with different charge masses, shell thicknesses, and shell head lengths. The results reveal that thicker charge shells and longer shell heads decrease the surface area and the depth of spalling damage on the rear surface of concrete structures. In addition, to investigate the damage mechanism and predict the critical collapse thickness (CCT), two- and three-dimensional finite-element models were developed and correlated well with the experimental results. Parametric analyses are also applied to examine how the embedded depth, length-to-diameter ratio, shell thickness, and shell head length affect the CCT for a buried explosion. Finally, an empirical formula is proposed to estimate the CCT based on these factors.

Experimental and calculational analysis about the influence of the grain boundary diffusion depth on the magnetic properties of a sintered Nd-Fe-B magnet

The grain boundary diffusion process (GBDP) has been widely applied to increase the coercivity of Nd-Fe-B magnets. After GBDP with Dy/Tb-rich diffusion sources the thickness of the Dy/Tb-rich shell formed on the epitaxial layer of the 2:14:1 main phase grain decreases from the magnet surface to the center. However, the influence of the Dy/Tb-rich shell gradient distribution on magnetic properties has not been thoroughly studied. In this work, a sintered Nd-Fe-B magnet was subjected to GBDP with Pr60Tb10Cu30 alloy at 860°C for various diffusion times (3 h, 6 h and 9 h). The coercivity improves rapidly from 884 kA/m (without GBDP) to 1533 kA/m after GBDP of 3 h. The coercivity further increases to 1741 kA/m with increased diffusion time to 6 h. But only marginal coercivity enhancement (rising to 1803 kA/m) can be obtained by further prolonging the diffusion time to 9 h. Microstructure analysis indicates that the long diffusion time leads to the surface grain coarsening, which degrades the diffusion efficiency. Meanwhile, micromagnetic simulation indicates that if the thickness of the Tb-rich shell in magnet center is less than 4 nm, the coercivity increases significantly with the enhanced thickness uniformity of the Tb-rich shell. But if the thickness of the Tb-rich shell in magnet center is higher than 4 nm, the coercivity cannot be improved effectively by further increasing the thickness uniformity of the Tb-rich shell. The results in this work clarify the mechanism of the magnetic property dependence on the diffusion time and help to optimize the GBDP parameters in the future.

Size dependent photogeneration charge carrier density of hollow ZnIn2S4 microspheres for enhanced photocatalytic activity

The effect of the morphology of semiconductors on the photocatalytic performance is commonly observed but ambiguous due to the other structural changes usually occur simultaneously along with morphology variation. In this work, we have successfully constructed a series of ZnIn2S4 hollow microspheres (named ZIS-x, x = 0.6, 0.2, 0.15, 0.1, 0.06.) with systematically decreased size in both shell thickness and diameter of the sphere and comparable band structures, degree of crystallinity and density of defects as confirmed by extensive characterizations. Taking advantage of the above features, the decoupled effect of size on photocatalytic activity is investigated and established, which displays a volcano-type relationship. The best performed ZIS-0.1 displays a hydrogen evolution rate of 3.76 mmol g-1h−1, which is 2.66 times that of the worst performed ZIS-0.6. Further mechanistic studies disclose that the observed size dependent hydrogen evolution rate originates from the ability of charge carrier generation under light, which increases with the light harvesting ability of the hollow microspheres. This work explicitly reveals the effect of the morphology on the photocatalytic activity of semiconductors, which highlights the route to improve the photocatalytic performance morphologically.

Hollow sphere CuCo2O4 as highly efficient catalyst of microwave-assisted Fenton-like reaction for water treatment

In industries with high-value addition, the demand for rapid pollutant breakdown through advanced water treatment techniques is growing. The microwave (MW)-assisted Fenton-like reaction is notable for its exceptionally fast reaction rate, providing enhanced economic benefits, especially in the context of limited factory space. In this research, hollow sphere-shaped CuCo2O4 was synthesized at the various temperature (200 °C, 250 °C, 300 °C, 350 °C, 400 °C, 450 °C, and 500 °C) and used in a MW-assisted Fenton-like reaction to break down the organic model compound, methyl orange (MO). Unlike typical Fenton reactions that are most effective in acidic conditions (around pH 3), the synthesized CuCo2O4 in this study demonstrated its highest efficiency at a circumneutral pH level (pH 6). It was observed that the majority of MO was oxidized by ∙OH within just 3.5 min under the optical condition (10 mg/L MO, 300 mg/L H2O2, 200 mg/L catalyst, pH 6, 20 °C, 200 W, and total volume of 50 mL). Ex-situ analysis confirmed the gradual generation of oxygen vacancies (OV) with each repeated cycle. The formation of OV enhances the catalyst's MW absorption and oxidation potential, resulting in the superior MO decomposition performance even after the 5th cycle. Although there were minor changes in the shell thickness and smoothness, along with some leaching (1.17 mg Cu/L and 0.01 mg Co/L per cycle), the catalyst continued to comply with the US Environmental Protection Agency (EPA) guidelines for drinking and discharge water.

Laying hen responses to multi-strain Bacillus-based probiotic supplementation from 25 to 37 weeks of age.

Investigate the efficacy of Bacillus-based probiotics supplemented at two different levels to modulate the productive performance, egg quality, tibia traits, and specific cecal bacteria counts of Hy-Line Brown layers from 25 to 37 weeks of age. A total of 216 twenty-five-week-old hens were randomly distributed into 3 experimental diets with 12 replicates of 6 birds per cage. Diets included basal diet supplemented with 0 (CON), 3 × 108 (PRO1), or 3 × 109 (PRO2) CFU of the test probiotic containing Bacillus subtilis PB6, Bacillus subtilis FXA, and Bacillus licheniformis G3 per kilogram of feed. Improved egg weights and mass at 29 weeks; and feed intake at 31 weeks (p < 0.10) were noticed with the probiotic-supplemented PRO1 and PRO2 diets. Considering egg quality, the shell thickness, Haugh units, and yolk color were improved; but yolk cholesterol was lowered (p < 0.05) with PRO1 and PRO2 diets at 29 weeks. At both 33 and 37 weeks, the egg-breaking strength, shell color and thickness, albumen height, Haugh units, and yolk color were improved; but yolk cholesterol was similarly lowered (p < 0.05) with the PRO1 and PRO2 diets. Improved tibia Ca, ash, weights, and density; and raised cecal counts of Bifidobacteria and Lactobacilli (p < 0.05) were noticed with PRO1 and PRO2 diets. Improved tibia P but reduced Clostridia counts (p < 0.10) were also observed with the PRO1 and PRO2 diets. Probiotic supplementation of Bacillus subtilis PB6, Bacillus subtilis FXA, and Bacillus licheniformis G3 at 3 ×108 CFU/kg of feed is adequate to significantly improve egg quality, lower yolk cholesterol, enhance several tibia traits, and raise the populations of beneficial cecal bacteria. Modest improvements in several productive parameters and tibia P but reduced Clostridia were also observed; and could warrant further investigation of probiotic effects beyond the current test period.

Nonlinear forced vibration of functionally graded hybrid three-phase nanocomposite toroidal shell segments reinforced by carbon nanotubes (CNTs) and graphene nanoplatelets (GPLs)

This study proposes a unique three-phase functionally graded (FG) hybrid nanocomposite material reinforcing the toroidal shell segments to investigate the nonlinear forced vibration using Reddy's higher-order shear deformation theory, von Karman geometrical nonlinearity and Stein-McElman's assumption along with the Hamilton principle. The examined toroidal shell's material consists of polymeric resin, carbon nanotubes (CNTs), and graphene platelets (GPLs) as nanocomposites. The material properties have been derived based on a modified Halpin-Tsai micromechanical model. Four distribution patterns have been studied: uniform (UD), FG-X, FG-O, and FG-V. The continuous distribution of GPLs and CNTs leads to inhomogeneous position-dependent properties throughout the shell thickness. The obtained differential equations of motion have been reduced to ordinary equations using Galerkin's technique. A multi-scales method (MSM) is used to estimate a closed-form solution representing the frequency-amplitude relation, and the state space representation is used along with numerical fourth-order Runge Kutta method (RK4) to obtain the nonlinear dynamic response of the toroidal shell. The accuracy of the current results obtained has been verified by comparing them with the relevant literature and numerical results using (RK4). In addition, the influence of both GPLs and CNTs weight fractions, nanofillers’ distribution types, longitudinal and circumferential wave numbers, elastic foundation parameters, static axial compression load, transverse excitation load, damping ratio, geometrical characteristics of the toroidal shell on the dimensionless natural frequency, nonlinear primary resonance (frequency-amplitude curve), and nonlinear dynamic response are carefully studied. The results found that combining (GPLs & CNTs) into the shell's matrix improves performance, especially in concave shells compared to convex ones. The FG-X pattern reduces peak resonance amplitude and improves natural frequency. A reduction of 12.3% is observed for convex shells, and 21.5% for concave shells compared to FG-O.